Eradur AB
Polyuretan
Eradur AB
The benefits of polyurethane as an industrial floor are:
-
- Highly wear-resistant
- Resistant to high temperatures, e.g., can be steam cleaned
- Excellent flexible performance
- Optimal solution for industrial floors
Vapors from the hardener-component contain isocyanates. Direct skin contact with isocyanates is moderately irritating. The isocyanates used today have low volatility or are prepolymers of isocyanates, ie. they are pre-reacted to get better working environment characteristics. Eradur AB uses only low volatility isocyanates. A person who has previously experienced isocyanate asthma can have difficult problems with even very low levels of isocyanates in the air and should not be in the proximity when the coating work is going on.
Safety and Curing Time for Polyurethane Floors
If you are bothered when working with isocyanates, you should immediately change the vicinity and breathe in the fresh air and not be left alone. the work area must be marked with tape or similar from the rest of the room and other work must not occur within the marked area. The rest of the room is affected very little and other work can proceed without restrictions if ventilation is deemed to be sufficient. The curing time for polyurethane floors is normally about a day.
The curing time for polyurethane floors is usually around one day before the floor can be walked on.
Contact
Contact us below if you would like a non-binding quote for a polyurethane floor.
Eradur AB
Contact us
We can help you find the best solution for your specific environment. Our focus is, of course, on delivering the best seamless coatings possible, but if there are better alternatives, we will let you know. Our assortment is quite wide, and if you have special requirements, we as experts in thermosetting plastics will customize our products to suit your needs.
We have a high level of service and are used to a fast pace. Together with our contractors, we can help you find the right solution, at the right time at the right price!
Eradur ApS
Postadresse:
Eradur ApS
Crowe Horwath
Rygårds Allé 104
2900 HELLERUP
Telefon: +45 40 40 58 59
CVR: 37412163
dk[at]eradur.com
ordre[at]eradur.com
invoice[at]eradur.com
Contact us
Fields marked with * are mandatory.